Many will know the battery boxes in the T-800 build can be problematic\drain quickly and costly in replacing. We've developed an adapter that will allow you to do away with both battery boxes.
 
The adapter will be set at 6v. 6v is then supplied to the base board. The 6v is then stepped down to 4.5v to satisfied the head. Ample cable has been given that will allow you to root the cable from the base to the head.
 
Simply un-plug your battery boxes and plug the adapter wires back in. Plug your adapter ito a socket and that's it.
 
The adapter\partworks box has been tested with a completed T-800. See video attached.
 
You'll receive:
 
1 x Adapter UK
1 x Partworks Control Box
1 x EU\US or AUS plug adapter (Please Select)
1 x Sleeving (already added)
 
We do not provide instructions on the best method of fitting, as we find everyone has their own style. However, ours can be seen in the image. We've filed a small area at the back to allow the cable to be fed through.
 
Note - removal of the red label or seal on the adapter will void any claim with us.
 
You MUST always use the power adapter supplied, as this is configured correctly. You risk damaging your build if you use a different power source.
PartworkUpgrades are not responsible for any issues arising from the fitting of our adapter. If you need assistance\advice, please get in touch using the contact form.